RH302 Questions and Answers

Do the following steps as:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10.Create the two RAID partitions having equal size of remaining all free space.

11.Click on RAID button

12.Type mount point /data

13.Select RAID Level 0

14.Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.groupadd sysuser

groupadd command is used to create the group and all group information is stored in /etc/group file.

By Default system accept the logs only generated from local host. To accept the Log from other host configure:

vi /etc/sysconfig/syslog

SYSLOGD_OPTIONS="-m 0 -r"

Where

-m 0 disables 'MARK' messages.

-r enables logging from remote machines

-x disables DNS lookups on messages recieved with -r

service syslog restart

#vi /etc/resolv.conf

nameserver 172.24.254.254

# dig server1.example.com

#host server1.example.com

DNS is the Domain Name System, which maintains a database that can help your computer translate domain names such as www.redhat.com to IP addresses such as 216.148.218.197. As no individual DNS server is large enough to keep a database for the entire Internet, they can refer requests to other DNS servers.

DNS is based on thenameddaemon, which is built on the BIND (Berkeley Internet Name Domain) package developed through the Internet Software Consortium

Users wants to access by name so DNS will interpret the name into ip address. You need to specify the Address if DNS server in each and every client machine. In Redhat Enterprise Linux, you need to specify the DNS server into /etc/resolv.conf file.

After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

It is due to either default runlevel or runlevel specific scripts.

id:?:initdefault:Where default runlevel is specified. It shouldn’t be 6.

l3:3:wait:/etc/rc.d/rc 6It reads the scripts of runlevel 6 while booting system on rulevel 3.

It should be like:

si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0

l1:1:wait:/etc/rc.d/rc 1

l2:2:wait:/etc/rc.d/rc 2

l3:3:wait:/etc/rc.d/rc 3 Should be like this

l4:4:wait:/etc/rc.d/rc 4

l5:5:wait:/etc/rc.d/rc 5

l6:6:wait:/etc/rc.d/rc 6

Do the following steps as:

vi /etc/resolv.conf

nameserver 172.24.254.254

host server1.example.com

On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolve from DNS server.

Do the following steps as:

1.Use fdisk /dev/hdaTo create new partition.

Type nFor New partition

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.

Type t to change the System ID of partition.

Type Partition Number

Type 82 that means Linux Swap.

Press w to write on partitions table.

Either Reboot or use partprobe command.

mkswap /dev/hda?To create Swap File system on partition.

swapon /dev/hda?To enable the Swap space from partition.

free –mVerify Either Swap is enabled or not.

vi /etc/fstab

/dev/hda?swapswapdefaults0 0

Reboot the System and verify using free command that swap is automatically enabled or not.

When root unable to login into the system think:

Is password correct?

Is account expired?

Is terminal Blocked?

Do these Steps:

Boot the System on Single user mode.

Change the password

Check the account expire date by using chage –l root command.

If account is expired, set net expire date: chage –E “NEVER” root

Check the file /etc/securettyWhich file blocked to root login from certain terminal.

If terminal is deleted or commented write new or uncomment.

Reboot the system and login as a root.

1. vi /etc/resolv.conf

Write : nameserver 192.168.0.254

Do the following steps as:

1.vi /etc/dhcpd.conf

ddns-update-style none;

option routers 192.168.0.1;

option domain-name “example.com”;

option domain-name-servers 192.168.0.254;

default-lease-time 21600;

max-lease-time 43200;

subnet 192.168.0.0 netmask 255.255.255.0

{

range 192.168.0.1 192.168.0.254;

host dns1 {

hardware ethernet 00:50:FC:98:8D:00;

fixed-address 192.168.0.254;

}

host dns2 {

hardware ethernet 00:50:FC:98:8C:00;

fixed-address 192.168.0.253;

}

}

/etc/dhcpd.conf file is used to configure the DHCP. Some global options i.e Gateway, domainname, DNS server specified using option keyword. To assign as static ip from dhcp server, required the mac address of interface.

2. Check the SELinux Context, should be like this:

-rw-r--r-- root root system_u:object_r:dhcp_etc_t /etc/dhcpd.conf

3. Use the restorecon –R /etc command to restore the selinux context of the file.

4.service dhcpd start | restart

Do the following steps as:

1.vi /etc/hosts.deny

in.telnetd:ALL EXCEPT 192.168.0.

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

-Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address. Here in.telnetd is the telnet server program name.

Do the following steps as:

1.vi /var/named/chroot/etc/named.conf

options {

forwarders { 192.168.22.250; };

forward only;

};

2. service named start | restart

Caching-only name server forwards a request to another name server or to the root name servers in orders to determine the authoritative name server for the resolution. Once resolution has taken place, the caching-only name server stores the resolved information in a cache for the designated time to live period.

At exam Lab example.com domain resides on 172.24.0.0/16 Network and my133t.org resides on 172.25.0.0/16 Network.

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 172.24.0.0/255.255.0.0

acl denynet src 172.25.0.0/255.255.0.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

Do the following steps as:

1.iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp -j SNAT –to-source 202.2.2.2.

POSTROUTINGThis filter point handles packets immediately prior leaving the system.

When Packets leave the system all’s source address change to 202.2.2.2 and can access the internet.

iptables is the build-in firewall tools, used to filter the packets and for nat. By identifying Source Address, Destination Address, type of protocol, source and destination port we can filter the packets.

-sSource Address

-dDestination Address

-pLayer 3 Protocol

-dDestination Address

--sportSource Prot

--dportDestination Port

-iIncoming Interface

-oOutgoing Interface

-tTable either filter or nat or mangle

-AChain can be either INPUT, OUTPUT, FORWARD, PREROUTING, POSTROUTING.

Do the following steps as:

1.touch /etc/nologin

2.vi /etc/securetty

comment all available terminall then first.

If /etc/nologin file is created, then pam modules pan_nologin deny to all non-root users to login locally.

/etc/pam.d/login file calls the module.

#%PAM-1.0

auth requiredpam_securetty.so

auth requiredpam_stack.so service=system-auth

auth requiredpam_nologin.so

account requiredpam_stack.so service=system-auth

password requiredpam_stack.so service=system-auth

# pam_selinux.so close should be the first session rule

session requiredpam_selinux.so close

session requiredpam_stack.so service=system-auth

session optionalpam_console.so

# pam_selinux.so open should be the last session rule

session requiredpam_selinux.so multiple open

pam_securetty modules checks the /etc/securetty file, which terminal are available to root. If terminal is not available in this file then pam_securetty module deny to login on unavailable terminal to root user.

Do the following steps as:

1.vi /etc/hosts.deny

sshd:ALL EXCEPT .example.com: spawn echo “Loging attempt from %c to %s” | mail –s “Login from denied hosts” root

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

-Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

At exam Lab example.com domain resides on 192.168.0.0/24 Network and cracker.org resides on 192.168.1.0/24 Network.

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl denynet src 192.168.1.0/255.255.255.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

Do the following steps as:

1.vi /etc/hosts.deny

vsftpd:ALL EXCEPT .example.com

or

1.vi /etc/hosts.deny

vsftpd:ALL

2.vi /etc/hosts.allow

vsftpd:.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

- Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup = mygroup

server string=Share from Linux Server

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

[data]

path=/data

writable=no

public=no

browsable=yes

write list= user1 user2

2.smbpasswd –a user1

3.smbpasswd –a user2

……..

4.service smb start | restart

5.chkconfig smb on

Samba servers helps to share the data between linux and windows. Configuration file is /etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

If any valid users option is not specified, then all samba users can access the shared data. By Default shared permission is on writable=no means read only sharing. Write list option is used to allow write access on shared directory to certain users or group members.

You should know about the /etc/inittab file, where default runlevel will define. And Much more runlevel specific Scripts are called here.

Actually that problem will occur if you don’t specify the default runlevel.

Reboot the system

Boot the System on single user mode.

Except for a normal boot of Linux, single-user mode is the most commonly used option. This is the system maintenance mode for experienced Linux administrators. It allows you to perform clean backups and restores to any partitions as needed from local hardware. It also allows you to run administration commands, recover or repair password and shadow password files, run filesystem checks, and so forth.

vi /etc/inittab and Write

id:runlevel:initdefault:

Standard Runlevels in RedHat Enterprise Linux

Runlevel

Description

0

Halt

1

Single-user mode, for maintenance (backups/restores) and repairs

2

Multiuser, without networking

3

Multiuser, with networking

4

Unused

5

X11, defaults to a GUI login screen. Logins bring the user to a GUI desktop.

6

Reboot (never set initdefault in /etc/inittab to this value!)

Do the following steps as:

1.First check the size of Logical Volume: lvdisplay /dev/vo/myvol

2.Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol

3.Make Available the size on online: resize2fs /dev/vo/myvol

4.Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol

5.Verify that the size comes in online or not: df -h

We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without unmount as well as we can bring the actual size of Logical Volume on online using ext2online command.

Very Tricky question from redhat. Actually question is giving scenario to you to implement quota to neo user. You should apply the quota to neo user on /home that neo user shouldn’t occupied space more than 70K.

1.vi /etc/fstab

LABEL=/home/homeext3defaults,usrquota0 0To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and grpquota for group quota.

2.touch /home/aquota.userCreating blank quota database file.

3.mount -o remount /homeRemounting the /home with updated mount options. You can verify that /home is mounted with usrquota options or not using mount command.

4.quotacheck -u /homeInitialization the quota on /home

5.edquota –u neo /homeQuota Policy editor

See the snapshot

Disk quotas for user neo (uid 500):

Filesystem blocks soft hard inodes soft hard

/dev/mapper/vo-myvol 2 30 70 1 0 0

Can you set the hard limit 70 and soft limit as you think like 30.

Verify using the repquota /home command.

Do the following steps as:

1.chmod 770 /archive

2.Verify using : ls –ld /archive

Preview should be like:

drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive

To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive

Do the following steps as:

1.vi /etc/cron.allow

root

or

vi /etc/cron.deny

Write all user name to deny.

/etc/cron.allow, /etc/cron.deny file is used to control users to allow or deny. If /etc/cron.allow file is created only that users are allowed to run cron schedule. Another way to deny to users is /etc/cron.deny write all user name on single line.

Do the following steps as:

1.rpm -ivh ftp://server1.example.com/pub/updates/kernel-2.6.19-11.i686.rpm

2.vi /etc/grub.conf

default=1Change this value to 1

timeout=5

splashimage=(hd0,0)/grub/splash.xpm.gz

hiddenmenu

title Red Hat Enterprise Linux ES (2.6.19-11)

root (hd0,0)

kernel /vmlinuz-2.6.19-11.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.19-11.EL.img

title Red Hat Enterprise Linux ES (2.6.9-5.EL)

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

According question that kernel is available to anonymous user. You can directly install from the ftp server using rpm command.

When you install the kernel, it will write on /etc/grub.conf file. You can set the default kernel by changing the default value. See on the output of /etc/grub.conf file that new kernel is on first title so it’s index is 0 and previous kernel’s index is 1.

We can change the permission of file/directory either character symbol method or numeric method.

Permission:

r-Read

w-Write

x-Execute

Permission Category

u- Owner User

g- Owner Group

o- Others

Operators

+Add the Permissions

-Remove the Permissions

=Assigns the Permissions

Numeric Method:

4Read

2Write

1Execute

Total: 7, total for owner user, owner group member and for others : 777

chmod u+rwx /data

chmod g+rwx /data

chmod o-rwx /data

or

chmod 770 /data

Verify the /data : ls –ld /data

You will get drwxrwx---

Steps of Creating LVM:

Physical Disk1

Physical Disk2

Physical Disk3

Physical Volume

Volume Group

Logical Volume 1

Logical Volume 2

Logical Volume 3

1.pvcreate /dev/hda8 /dev/hda9 /dev/hda10

pvdisplay command is used to display the information of physical volume.

2.vgceate test0 /dev/hda8 /dev/hda9 /dev/hda10

vgdisplay command is used to display the information of Volume Group.

3.lvcreate –L 250M –n testvolume1 test0

lvdisplay command is used to display the information of Logical Volume.

4.lvcreate –L 250M –n testvolume2 test0

5.mkfs –t ext3 /dev/test0/testvolume1

6.mkfs –t ext3 /dev/test0/testvolume2

7.mkdir /lvtest1

8.mkdir /lvtest2

9.mount /dev/test0/testvolume1 /lvtest1

10.mount /dev/test0/testvolume2 /lvtest2

11.vi /etc/fstab

/dev/test0/testvolume2/lvtest2ext3defaults0 0

/dev/test0/testvolume1/lvtest1ext3defaults0 0

To create the LVM( Logical Volume Manager) we required the disks having ‘8e’ Linux LVM type. First we should create the physical Volume, then we can create the Volume group from disks belongs to physical Volume. lvcreate command is used to create the logical volume on volume group. We can specify the size of logical volume with –L option and name with -n option.

Do the following steps as:

1.Create a partition having size 5 GB and change the syste id ‘8e’.

2.use partprobe command

3.pvcreate /dev/hda9Suppose your partition number is hda9.

4.vgextend test0 /dev/hda9vgextend command add the physical disk on volume group.

5.lvextend –L+5120M /dev/test0/lvtestvolume

6.verify using lvdisplay /dev/test0/lvtestvolume.

Do the following steps as:

1.vi /etc/sysconfig/network

GATEWAY=192.168.0.254

OR

vi /etc/sysconf/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=192.168.0.?

NETMASK=255.255.255.0

GATEWAY=192.168.0.254

2.service network restart

Do the following steps as:

Think while Problems occurred on booting System on Runlevel 5 (X Window).

/tmp is full or not

Quota is already reached

Video card or resolution or monitor is misconfigured.

xfs service is running or not.

Do These:

1.df –h /tmp/tmp is full remove the unnecessary file

quota usernameif quota is already reached remove unnecessary file from home directory.

Boot the System in runlevel 3.you can pass the Kernel Argument from boot loader.

Use command: system-config-displayIt will display a dialog to configure the monitor, Video card, resolution etc.

Set the Default Runlevel 5 in /etc/inittab

id:5:initdefault:

6.Reboot the System you will get the GUI login Screen.

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel5Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.vi /etc/exports

/data*.example.com(rw,sync)

Check the SELinux Context, should be like this:

-rw-r--r-- root root system_u:object_r:exports_t /etc/exports

Use the restorecon –R /etc command to restore the selinux context of the file.

2.service nfs start | restart

3.service portmap start | restart

4.chkconfig nfs on

5.chkconfig portmap on

In Linux to share the data we use the /etc/exports file. Pattern is:

Pathclient(permission)

Shared Directory Path, Client can be single host or domain name or ip address. Permission should specify without space with client lists in parentheses. NFS is RPC service so portmapper service should restart after starting the nfs service.

Do the following steps as:

1.vi /etc/security/limits.conf

user1hardnproc7

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

ftpftp.server1.example.com

Download thewww.html

Check the SELinux context of index page , should like this:

-rw-r--r-- root root system_u:object_r:httpd_sys_content_t /var/www/html/index.html

If SELinux Context is mismatched, use the restorecon –R /var command

move the downloaded file into /var/www/html

Rename the file into index.html

Check using linkshttp://stationx.example.com

/var/www/html is the default directory for httpd service. Index.html is the default directory index. To set the default page without configuring virtualhost copy the file as a index.html in /var/www/html.

Do the following steps as:

1.vi /etc/security/limits.conf

user1,user2-maxlogins1

@training-maxlogins5

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup = mygroup

server string=Share from Linux Server

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

[data]

path=/data

writable=no

public=no

browsable=yes

write list= user1 user2

2.smbpasswd –a user1

3.smbpasswd –a user2

……..

4.service smb start | restart

5.chkconfig smb on

Samba servers helps to share the data between linux and windows. Configuration file is /etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

If any valid users option is not specified, then all samba users can access the shared data. By Default shared permission is on writable=no means read only sharing. Write list option is used to allow write access on shared directory to certain users or group members.

Do the following steps as:

1.vi /etc/exports

/data*.example.com(rw,sync)

2.service nfs start

3.service portmap restart

4.chkconfig nfs on

5.chkconfig portmap on

In Linux to share the data we use the /etc/exports file. Pattern is:

Pathclient(permission)

Shared Directory Path, Client can be single host or domain name or ip address. Permission should specify without space with client lists in parentheses.

When user creates the file/directory, user owner will be user itself and group owner will be the primary group of the user.

There is one Special Permission SGID , when you set the SGID bit on directory,When users creates the file/directory automatically owner group will be same as a parent.

chmod g+s /data

Verify using: ls -ld /data

You will get: drwxrws---

Do the following steps as:

1. use the authconfig --nisserver= --nisdomain= --update

Example: # authconfig --nisserver=192.168.0.254 --nisdomain=RHCE --update

or system-config-authentication

2. Click on Enable NIS

3. Type the NIS Domain: RHCE

4. Type Server 192.168.0.254 then click on next and ok

5. You will get a ok message.

6. Create a Directory /rhome/stationx where x is your station number.

6. vi /etc/auto.master and write at the end of file

/rhome/stationx /etc/auto.home --timeout=60

7. vi /etc/auto.home and write

*-rw,soft,intr192.168.0.254:/rhome/stationx/&

Note: please specify your station number in the place of x.

8. Service autofs restart

9. Login as the nisuser2001 or nisuser2002 on another terminal will be

Success.

According to question, RHCE domain is already configured. We have to make a client of RHCE domain and automatically mount the home directory on your system. To make a member of domain, we use the authconfig with option or system-config-authentication command. There a are lots of authentication server i.e NIS, LDAB, SMB etc. NIS is aRPC related Services, no need to configure the DNS, we should specify the NIS server address.

Here Automount feature is available. When user tried to login, home directory will automatically mount. The automount service used the /etc/auto.master file. On /etc/auto.master file we specified the mount point the configuration file for mount point.

When user creates the file/directory, user owner will be user itself and group owner will be the primary group of the user.

There is one Special Permission SGID bit, when you set the SGID bit on directory,When users creates the file/directory automatically owner group will be same as a parent directory.

chmod g+s /data

Verify using: ls -ld /data

You will get: drwxrws---

Do the following steps as:

1.Open the Browser either firefox or links

2.Type :http://localhost:631

3.Click on Manage Printer

4.Click on Add Printer

5.Type Queue name like stationx and click on continue

6.Type Device type or printing Protocol: i.e Internet printing Protocol

7.Click on Continue

8.Type Device URL: ipp://server1.example.com/printers/printerx

9.Click on Continue

10.Select RAW Model printer

11.Click on Continue

12.Test by sending the printing job

Do the following steps as:

vi /etc/auto.master

/mnt/etc/auto.misc--timeout=50

vi /etc/auto.misc

data-rw,soft,intrserver1.example.com:/data

service autofs restart

chkconfig autofs on

When you mount the other filesystem, you should unmount the mounted filesystem, Automount feature of linux helps to mount at access time and after certain seconds, when user unaccess the mounted directory, automatically unmount the filesystem.

/etc/auto.master is the master configuration file for autofs service. When you startthe service, it reads the mount point as defined in /etc/auto.master.

Do the following steps as:

Steps of Creating LVM:

Physical Disk1

Physical Disk2

Physical Disk3

Physical Volume

Volume Group

Logical Volume 1

Logical Volume 2

Logical Volume 3

1.pvcreate /dev/hda8 /dev/hda9 /dev/hda10

pvdisplay command is used to display the information of physical volume.

2.vgceate test0 /dev/hda8 /dev/hda9 /dev/hda10

vgdisplay command is used to display the information of Volume Group.

3.lvcreate –L 250M –n testvolume1 test0

lvdisplay command is used to display the information of Logical Volume.

4.lvcreate –L 250M –n testvolume2 test0

5.mkfs –t ext3 /dev/test0/testvolume1

6.mkfs –t ext3 /dev/test0/testvolume2

7.mkdir /lvtest1

8.mkdir /lvtest2

9.mount /dev/test0/testvolume1 /lvtest1

10.mount /dev/test0/testvolume2 /lvtest2

11.vi /etc/fstab

/dev/test0/testvolume2/lvtest2ext3defaults0 0

/dev/test0/testvolume1/lvtest1ext3defaults0 0

To create the LVM( Logical Volume Manager) we required the disks having ‘8e’ Linux LVM type. First we should create the physical Volume, then we can create the Volume group from disks belongs to physical Volume. lvcreate command is used to create the logical volume on volume group. We can specify the size of logical volume with –L option and name with -n option.