Winter Sale - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpt65

010-151 Questions and Answers

Question # 6

In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller? (Choose two.)

A.

Dedicated Management port

B.

PCle ports

C.

KVM Console port

D.

QSFP port

E.

Ethernet LOM port

Full Access
Question # 7

Refer to the exhibit. Which component in the UCS B200 M5 is labeled C?

A.

Internal USB

B.

mLOM Connector

C.

CMOS Battery

D.

Mini Storage Connector

Full Access
Question # 8

Which statement about RAID is true?

A.

RAID is a scheme used to logically combine several independent disks to form an array or group of drives.

B.

RAID provides data redundancy with either odd parity or even parity.

C.

RAID drive group appears to the host computer as multiple physical storage units.

D.

RAID parity information can be stored across multiple RAID levels.

E.

RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks.

Full Access
Question # 9

Which processor option is supported in the Cisco UCS C420 M3 Server?

A.

up to two Intel Xeon E5-4600 series multicore processors

B.

up to two Intel Xeon E7-4800 series multicore processors

C.

up to four Intel Xeon E5-4600 series multicore processors

D.

two or four Intel Xeon E7-8800 series multicore processors

Full Access
Question # 10

Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)

A.

Its power supplies and fan trays are hot-swappable.

B.

It supports unified ports.

C.

It is offered in a one-rack-unit form factor.

D.

It has one expansion slot.

E.

It supports up to 96 10G BASE-T ports.

Full Access
Question # 11

On which three devices can the Host Upgrade Utility be performed? (Choose three.)

A.

C420

B.

C230

C.

B230

D.

B210

E.

C210

F.

B460

G.

C240

Full Access
Question # 12

Which important feature on the front end is provided to the clients by multiple servers that access the same storage devices across the SAN?

A.

recovery

B.

redundancy

C.

resiliency

D.

security

E.

storage

Full Access
Question # 13

Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt?

switch(boot) #"

A.

exec -> admin-password

B.

connect local-mgmt -> admin-password

C.

configure terminal -> admin-password

D.

connect nxos -> admin-password

E.

admin-password

Full Access
Question # 14

Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?

A.

Cisco Nexus 5548P

B.

Cisco Nexus 5548UP

C.

Cisco Nexus 5596UP

D.

Cisco Nexus 5596T

Full Access
Question # 15

Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)

A.

show cluster state extended

B.

show cluster extended-state

C.

show cluster HA status

D.

show cluster state

E.

show cluster HA state

Full Access
Question # 16

Which three options are the minimum browser requirements to log into the Cisco CIMC GUI? (Choose three.)

A.

Java 1.6 or higher

B.

HTTP and HTTPS enabled

C.

Adobe Flash Player 10 or higher

D.

Internet Explorer version 10

E.

Firefox 26.0

F.

Adobe Shockwave Player 11 or higher

Full Access
Question # 17

Refer to the diagram, match the following Ethernet frame fields.

Full Access
Question # 18

Refer to the exhibit.

Where is the best place to see whether the system is ready for a Fabric Interconnect failover?

A.

A - Overall Status operable

B.

B - L1 Connection

C.

C - Part Details

D.

D - Access

E.

E - High Availability Details

Full Access
Question # 19

What are two typical steps for troubleshooting a rack server with unrecognized or memory errors? (Choose two.)

A.

Check that the AC power cord is OK.

B.

Reseat DIMMs.

C.

Check CPU sockets for bent pins.

D.

Ensure DIMMs are installed in correct slots.

E.

Check the front I/O cable connection to the motherboard.

Full Access
Question # 20

Which two statements about FCoE are true? (Choose two.)

A.

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

B.

Encapsulates Ethernet frames into Fibre Channel frames, which allows them to run alongside traditional IP traffic.

C.

Increases capital costs due to the difficulty to manage.

D.

Consolidates I/O traffic in the data center.

E.

It allows Ethernet traffic to run over a Fibre Channel infrastructure.

Full Access
Question # 21

Which two statements are true for the Ethernet 802.3 standard? (Choose two.)

A.

An 802.3 Ethernet frame is 68 to 1518 bytes in length.

B.

CSMA/CD eliminates collisions for the switched LAN where multiple collision domains reside.

C.

It defines physical layer and data link layer protocols.

D.

The IEEE 802.3ab standard defines 10 Gigabit Ethernet over unshielded twisted-pair (UTP).

E.

Network layer protocol is carried in the payload field.

Full Access
Question # 22

Storage virtualization is commonly used for SANs in data centers to scale out the storage resources. The common methods of storage virtualization include array-based storage virtualization. What are the other two methods? (Choose two.)

A.

Host-based storage virtualization

B.

Hypervisor-based storage virtualization

C.

Embedded-based storage virtualization

D.

Switch-based storage virtualization

E.

Network-based storage virtualization

Full Access
Question # 23

Which two virtualization technologies are used in a modern data center design? (Choose two.)

A.

Storage virtualization

B.

Cloud virtualization

C.

Platform virtualization

D.

Server virtualization

E.

Application virtualization

Full Access
Question # 24

Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

A.

KVM cable

B.

console cable

C.

Ethernet cable

D.

SFP+ Ethernet transceiver cable

Full Access
Question # 25

Refer to the exhibit.

What does it mean when item 7 (System Status LED) has a blinking red status?

A.

Major fault with the system board

B.

Power shut down by software

C.

Secure boot validation has failed

D.

Power on Self-Test (POST) failed

E.

Major fault with memory DIMM

Full Access
Question # 26

Which Cisco MDS model supports the most Fibre Channel ports per chassis?

A.

MDS 9513

B.

MDS 9509

C.

MDS 9506

D.

MDS 9250i

Full Access
Question # 27

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.

Which four options should be verified? (Choose four.)

A.

Verify the power source to the equipment.

B.

Check for loose HDD cables.

C.

Reseat the DIMMs, CPU, and PCI cards.

D.

Verify that power supplies are receiving power.

E.

Reseat the mezzanine card connector.

F.

Check the CPU sockets for bent pins.

G.

Check the Cisco IMC for fan faults.

Full Access
Question # 28

On the Sensors page from the CIMC view, which four tabs are displayed to view further information? (Choose four.)

A.

Power Supply

B.

Fan

C.

Memory

D.

CPU

E.

LEDs

F.

Temperature

Full Access
Question # 29

Refer to the exhibit.

Where is the best place to see bootflash free space?

A.

A - Available Memory

B.

B - Total Memory

C.

C - Local Storage Information

D.

D - High Availability Details

Full Access
Question # 30

Which Cisco UCS Virtual Interface Card Series is designed exclusively for the M5 generation?

A.

M81KR VIC

B.

VIC 1400 Series

C.

VIC 1300 Series

D.

VIC 1200 Series

Full Access
Question # 31

What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?

A.

550 m

B.

10 km

C.

40 km

D.

80 km

Full Access
Question # 32

Which two devices does Cisco UCS 5100 Blade Server Chassis support? (Choose two.)

A.

S-Series Storage servers

B.

Blade servers

C.

Rack-mount Servers

D.

E-Series Servers

E.

Fiber Extenders

Full Access
Question # 33

Which PCle slot is the default for the rear RAID controller when the rear drive module is used with SAS/SATA drives in Cisco UCS C480 M5 sever?

A.

PCle slot 09

B.

PCle slot 10

C.

PCle slot 11

D.

PCle slot 12

Full Access
Question # 34

Which two specialized tools are needed to service a UCS product? (Choose two.)

A.

Cable Tester

B.

Needle-nose pliers

C.

Laptop

D.

Anti-static Strap

E.

KVM Console to USB 2.0 Portable Laptop Crash Cart

Full Access
Question # 35

Which statement is true about SFP?

A.

SFP modules convert the serial electrical signals to serial analog signals and vice versa.

B.

The small form-factor pluggable (SFP) is a compact, hot-pluggable copper module transceiver.

C.

SFP modules offer a simple and effective way to connect a single network device to a wide variety of fiber cable types.

D.

SFP modules can be classified based on the working voltage and size.

Full Access
Question # 36

Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)

A.

Decommission and acknowledge the blade.

B.

Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.

C.

Reseat the memory DIMMs.

D.

Check the CPU sockets for bent pins.

E.

Reseat the blade in the same slot in the chassis.

F.

Move the blade to another slot in the chassis.

Full Access
Question # 37

What are two descriptions for PCle? (Choose two.)

A.

The PCle 4.0 standard doubles the transfer rate compared to PCle 5.0.

B.

The PCle supports native hot-swap functionality.

C.

A link that is composed of four lanes is called an x4 link.

D.

The PCle standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

E.

A PCI Express x16 adapter can be installed into an x4 slot.

Full Access
Question # 38

Cisco UCS 5100 Blade Server Chassis supports which two devices? (Choose two.)

A.

Blade servers

B.

Fiber Extenders

C.

Rack-mount Servers

D.

S-Series Storage servers

E.

E-Series Servers

Full Access
Question # 39

With which data center type can a company lease the equipment and infrastructure?

A.

Managed services data center

B.

Colocation data center

C.

Green technology data center

D.

Enterprise data center

Full Access
Question # 40

What are two functions of FCoE? (Choose two.)

A.

It allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

B.

It consolidates I/O traffic in the data center.

C.

It allows Ethernet traffic to run over a Fibre Channel infrastructure.

D.

It increases capital costs due to the difficulty to manage.

E.

It encapsulates Ethernet frames into Fibre Channel frames, which allows them to run alongside traditional IP traffic.

Full Access
Question # 41

Which tool is needed when servicing a UCS M5 server?

A.

PCle slot cover

B.

T-30 Torx driver

C.

M5 DIMM puller

D.

HDD removal tool

Full Access
Question # 42

Refer to the exhibit.

This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?

A.

Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors

B.

Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors

C.

Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors

D.

Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors

Full Access
Question # 43

A company wants to build a data center infrastructure which can provide up to 99.982% uptime availability per year. Which ANSI/TIA-942 data center tier meets the requirement?

A.

Redundant-distribution site infrastructure

B.

Redundant-capacity component site infrastructure

C.

Concurrently maintainable site infrastructure

D.

Basic site infrastructure

Full Access
Question # 44

Which command-line interface mode is described by Switch (config) #?

A.

EXEC mode

B.

Global configuration command mode

C.

Boot mode

D.

Local management mode

Full Access
Question # 45

Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)

A.

Cisco DB-9-to-RJ-45 console cable

B.

laptop

C.

monitor

D.

keyboard

E.

KVM dongle

F.

USB serial adapter

Full Access
Question # 46

Which two firmware components does the Host Upgrade Utility upgrade? (Choose two.)

A.

Fabric Interconnect firmware

B.

Cisco UCS Infrastructure software

C.

Cisco UCS Manager

D.

CIMC

E.

System BIOS

Full Access
Question # 47

Up to what speed can Category 5e UTP cable transmit data?

A.

10 Mb/s

B.

100 Mb/s

C.

1000 Mb/s

D.

10000 Mb/s

Full Access
Question # 48

Which two commands provide views of the high availability state between the two clustered Fabric Interconnects? (Choose two.)

A.

show cluster HA state

B.

show cluster HA status

C.

show cluster extended-state

D.

show cluster state

E.

show cluster state extended

Full Access
Question # 49

Refer to the exhibit.

Which item does B represent?

A.

mLOM

B.

Rear 2.5-inch drive bays

C.

PCle Riser 1

D.

PCle Riser 2

E.

Power Supply

Full Access
Question # 50

How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?

A.

Use the Cisco UCS Admin.

B.

Use the Cisco UCS Application.

C.

Use the Cisco UCS Assistant.

D.

Use the Cisco UCS Manager.

Full Access